Rhonda Bracey: At Random

I’m not sure if I like this quilt or not, but it doesn’t matter as it’s not mine! I quite like green/purple colour combinations, but I’m not sure that they worked too well in this arrangement, especially with the scrappy centres.

How to quilt it? Stitch in the ditch of course around each block, in matching lime green and purple threads. But what to do with that big expanse of dark green background fabric? I was tempted just to do a simple meandering stipple, but eventually decided on an echoed leaf motif, filled with pebbles in the empty spaces between the leaves. It was the first time I’d tried this motif and I liked how it fills the empty spaces really well. It was also very easy to do. But it did use a lot of thread — I think I went through about three 230-yd bobbins just doing the background.

(Click on a photo to view it larger)

Threads used:

• Top: Robison-Anton ‘Ming’ (40 wt, rayon, colour 2322); Robison-Anton (40 wt, rayon, purple of some sort); Fil-Tec Affinity ‘Forest’ (40 wt, trilobal polyester, colour 60293 [variegated deep greens])
• Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (black)

There was SO much white space in this large quilt that it was almost a wholecloth quilt. The fabrics and colours in the borders sort of indicated that the eventual home for this quilt might be a men’s homeless shelter that the Community Quilts program donates quilts to, but then there was that very strange bald woman in a pinafore holding a teddy bear in the middle! What was up with that? And then there were those strange scrappy log cabin blocks in the corners, which seemed out of place with the rest of the fabrics and design.

Anyhow… how to quilt it?

Stitching in the ditch was a given around the centre block, the appliqued woman, and the border. But what to do with that enormous amount of white space? I thought of rounded shapes like feathers and headband variations, but that didn’t fit with the geometric nature of the borders. My next thought was a squared meandering stipple, but that didn’t seem right either. Then I thought about bricks. So I measured and marked lines and points for layers of bricks and mortar. But still the empty areas were quite puffy, so I needed some sort of pattern inside the bricks to tame the puffiness.

I decided to do fairly close straight lines in the bricks closest to the ‘window’ in the middle, thus creating the illusion of an old-style brick building with different bricks or stones for the window surround. But I knew that continuing that through all the bricks would not only take a lot of time, but would also tighten the quilt up too much with the quilting. So for the remaining bricks I stitched free-form shapes, emulating stones (I hope!).

For the borders, I just stitched straight lines about an inch or so apart. I didn’t use any rulers or markings for these straight lines or the ones inside the bricks near the ‘window’. I echo quilted the appliqued woman and teddy bear and then stippled around her, adding straight lines (in a variegated red) to the red frame around this block.

(Click on a photo to view it larger)

Back:

Threads used:

• Top: Fil-Tec Glide ‘Cream’ (40 wt, trilobal polyester, colour 20001) — used for most of this quilt; Robison -Anton ‘Platinum’ (40 wt, rayon, colour 2571) — used for the stipplling in the centre block and the borders; Mettler Poly Sheen Multi (40 wt, polyester, colour 9924 [variegated reds]) — used for the red frame
• Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (white)

This was an odd quilt. Odd shapes, odd colour combinations. (As always, my opinion only! I don’t make them — I just quilt them.)

How to quilt it? Well, for starters, I stitched in the ditch around all the dark shapes. I was thinking of doing something geometric in the pink areas, but I only had three small spools of various pale pink threads from different manufacturers, so I decided to do an all-over motif so that it wasn’t obvious where I changed threads as each spool ran out. I mostly did a combination of feathers and spirals.

(Click on a photo to view it larger)

Threads used:

• Top: Gutermann Sulky variegated pale pink ( 40 wt, rayon, colour 2100); Robison-Anton (40 wt, rayon, pale pink — no idea of the colour as the label went missing long ago); Madeira Rayon (40 wt, rayon, colour 11120)
• Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin

This quilt was a real challenge. It had a high-loft polyester batting in it, which, while it may make the quilt very warm to snuggle under, is an absolute sod to quilt as it’s SO puffy. However, the maker had hand basted it, so it stayed together reasonably well. But even with that, there’s no way you can keep it from puckering, except by quilting the life out of it.

To control the puffiness, I stitched in the ditch (in a pale blue thread) around all the blocks and borders, and then around and within all the appliqued centres of each block. But still there was a lot of puffiness in those centres and in the borders. I decided to leave the plain blue border and the appliqued centres puffy so that they remain very tactile.

For the outer border, I just did a large meandering stipple in the blue thread to hold the layers together. This was a ‘busy’ fabric, so there was no point in dong anything very clever in this outer border. Besides, the polyester batting wanted to escape so I had to stitch in such a way to hold it in and to not cause puckers in the border.

For the blocks, I decided to beat the puffiness in the white areas into submission by McTavishing around each appliqued centre. It took quite a bit of time, but I think it was worth it.

Did I mention it was big?

(Click on a photo to view it larger)

Still very puffy even after stitching in the ditch around everything

Threads used:

• Top: Robison-Anton ‘Paris blue’ (40 wt, rayon, colour 2283); Wonderfil Silco (40wt, white, colour SC03)
• Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (white)

I think someone tried to use up some of their scraps for this quilt. Although there were some quite nice fabrics in this mishmash, the combinations just didn’t work for me. There seemed to be no rhyme or reason as to how the maker had put the fabrics together. The quilt looked OK from a distance, but up close it was hard on the eyes. And there was 1980s dusky green sheeting on the back.

How to quilt this ‘busy’ quilt? There was too much going on with the fabrics to do anything complex, so I went with a very simple 8-pointed wonky star in each block, after first stitching in the ditch around each block. I continued the theme in the sashing joins, stitching a little 8-pointed wonky star there too.

(Click on a photo to view it larger)

Threads used:

• Top: Fil-Tec Glide ‘Mint’ (40 wt, trilobal polyester, colour 60345)
• Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (white)

I liked the apparent simplicity of this quilt, yet when you deconstruct it to see how it was put together, it was quite complex. I also liked the colours.

How to quilt it?

1. I started by stitching in the ditch around the centre design, and around the borders.
2. Then I echo stitched a 1/2 inch from these lines, and about 3 inches out from the purple border’s seams.
3. I decided to let the centre design ‘pop’, so stitched quite heavily in the negative space, using my variation of McTavishing.
4. For the outer border, I decided to emulate the spikiness of the central design and marked points (orange chalk marks) to create the triangles.
5. At each outer border corner, I stitched a stylised leaf, though perhaps I should have attempted a ladybug (as you would’ve done, Joan C!).

I really liked the finished quilt and am very pleased with how I quilted it. I hope WAQA consider using this one as a raffle quilt.

(Click on a photo to view it larger)

Back:

Threads used:

• Top: Mettler Metrosene (polyester, 40 wt?, colour 781 [off-white used for most of the stitching on this quilt]; Gutermann (polyester, 40 wt?, colour 156 [red around the ladybugs]; Madeira (rayon, 40 wt, colour 1169 [green for the stitch-in-the-ditch in the border]; Gutermann (polyester, 40 wt?, colour 810 [purple around the flowers]
• Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (white)

Another ‘eye spy’ quilt, with lots of busy-ness going on in the fabric colours and patterns.

How to quilt it? Well, an all-over motif was the logical choice, in a thread colour (dark purple) that blended. I did what I’m calling a ‘Lady Liberty’ motif — start with an arc, then come back over the arc with upside-down V-shaped spikes, start the next arc, repeat…

You should be able to see what I mean by looking closely at the centre photo and the back.

(Click on a photo to view it larger)

Back”

Threads used:

• Top: Madeira (rayon, 40 wt, colour #1112 [dark purple])
• Bottom: Fil-Tec Magna Glide pre-wound bobbin (lead gray)

This pretty pastel quilt had lots of conflicting motifs — ragged circles, embroidered cupcakes in squares, and a variety of colours.

How to quilt it?

1. Using a pastel variegated thread, I stitched in the ditch around all the blocks, including the inner squares of the cupcake blocks and around each cupcake.
2. Next were the circles — I echo stitched in between the existing spirals, then flowed off the spiral motif into a large meander around the circles.
3. I echo quilted the cupcakes, then did a heart/leaf motif in the surrounding strips.
4. With a soft green thread, I stitched a straight line in the border around the entire quilt, 1/2 inch from the border’s seam.
5. Finally, I used one of my Handi Quilt scallop/shell rulers and stitched the borders n that same green thread. I just did the echo quilting around the scallops free hand (no ruler or marking). I still haven’t figured out how to do corners with these rulers! Even if you mark the centres and work out how many half circles you need, the rulers still slip and go off-kilter <grrr>. So only one of the corners in the borders looks even vaguely right.

(Click on a photo to view it larger)

Back:

Threads used:

• Top: Silco (colour #SCM03 [variegated pastel]); Madeira (rayon, 40 wt, colour 1047 [soft green in border])
• Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (white)

Even though I’m not really a fan of pink, I quite liked this flying geese quilt. But how to quilt it?

I decided to go simple by stitching in the ditch around all the geese and their panels, and then stitching a border line about 1/2 an inch from each panel. And that was it. I could’ve done much more, but to be honest I though that what I’d done was enough to enhance the quilt. (BTW, I started using my Line Tamer ruler for stitching around each of the geese, but that took too long, so I just did it without the ruler for five of the panels — the centre photo below shows my freehand ‘straight’ lines without the ruler; however, I did use the ruler for the echo stitching around each panel.)

Surprisingly, the thread I used wasn’t pink but was a variegated thread of yellows and purples! It blended in well.

(Click on a photo to view it larger)

Threads used:

• Top: Wonderfil Mirage (30 wt, rayon?, colour SD 32)
• Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (white)