Community Quilt 382

30 03 2018

For this sea-themed quilt, I quilted free-motion wavy lines horizontally across the quilt, after stitching in the ditch around the main blocks.

(Click on a photo to view it larger)

Threads used:

  • Top: Floriani (40 wt, rayon, colour PF074)
  • Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (lead gray)

Photos of all the Community Quilts I’ve quilted are here: http://www.flickr.com/photos/rhondamadeit/sets/72157630291250200/





Macaw! Macaw!

21 03 2018

I finally finished the macaw art quilt I started last year. Actually, I finished it late last year, but since then I’ve entered it in an art competition (textile category) where a condition of entry was that it had to be for sale. That competition is over now, so now I can put up the pictures of it.

The finished size is 28″ [width] x 29.5″ [height] (71 x 75 cm) and it has a hanging sleeve.

As you can see from the close-up photos, it has hundreds of thousands of stitches and uses many different fabrics and threads.

This art quilt is now available for sale from my Etsy store: https://www.etsy.com/au/listing/605106886/macaw-macaw-art-quilt

(Click on a photo to view it full size)

Back:

In situ at the art exhibition:





Christmas tree quilt

17 03 2018

When I was on my quilting retreat with friends in February, I put this Christmas tree top together — I’d made the trees back in January, but hadn’t had a chance to finish off the quilt top with the extra white fabric. The trees are made from fabric scraps in blues, greens, and purples. I based my trees on this pattern from Craftsy: https://www.craftsy.com/quilting/article/scrappy-christmas-tree-quilt-block/. I added a yellow, orange, or red swatch of fabric at the top of each tree to emulate a star or light.

I quilted it with wobbly vertical lines, with the occasional ‘snowflake’ interspersed in amongst them. And I added Christmas stars and radiating ‘lights’ at the top of each tree, in a gold metallic thread. It’s bound in the same white fabric as used in the rest of the quilt top.

(Click a picture to view it larger)

Threads used:

  • Top: Fil-Tec Glide ‘White’ (40 wt, trilobal polyester, colour 10000); Fil-Tec Glisten ‘Gold’ (40 wt, metallic, colour 60088)
  • Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (white)




Blue, grey, and gold Asian-style quilt

17 03 2018

When I was on my quilting retreat with friends in February, I made two more quilt tops from the pattern I created myself (see the second quilt in this post: https://rhondabracey.com/2018/01/31/pink-quilts-for-donating-to-the-mcgrath-foundation/). Both were made with Asian-style fabrics, in cotton fat quarters.

This is the blue, grey, and gold themed one; the other is red and gold (https://rhondabracey.com/2018/03/17/red-and-gold-asian-style-quilt/).

I quilted it in overlapping squares, using a gold thread. The border is a black fabric with a gold dot pattern. The backing fabric is a navy cotton.

This quilt is available for sale on my Esty store: https://www.etsy.com/au/listing/601066847/blue-gray-and-gold-asian-style-lap-quilt

(Click on a photo to view it larger)

Threads used:

  • Top: Fil-Tec Glide ‘Military Gold’ (40 wt, trilobal polyester, colour 27407)
  • Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (lead gray)

 





Red and gold Asian-style quilt

17 03 2018

When I was on my quilting retreat with friends in February, I made two more quilt tops from the pattern I created myself (see the second quilt in this post: https://rhondabracey.com/2018/01/31/pink-quilts-for-donating-to-the-mcgrath-foundation/). Both were made with Asian-style fabrics, in cotton fat quarters.

I quilted it with overlapping spirals, using a gold thread. The border is a black fabric with a gold dot pattern. The backing fabric is a very soft cream cotton.

This is the red and gold themed one; the other is blue and gold: https://rhondabracey.com/2018/03/17/blue-grey-and-gold-asian-style-quilt/

This quilt is available for sale on my Esty store: https://www.etsy.com/au/listing/601066315/red-and-gold-asian-style-lap-quilt

(Click on a photo to view it larger)

Back:

Threads used:

  • Top: Fil-Tec Glide ‘Military Gold’ (40 wt, trilobal polyester, colour 27407)
  • Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (light tan)

 





Community Quilt 381

17 03 2018

What a cheerful quilt this was! Lots of green book worms, surrounded by white space and small bright coloured squares, and a cheery border. As usual I started by stitching in the ditch around all the main blocks, in white. Then I swapped to a lime green thread and just did a large meandering stipple across the main quilt top. I used the same thread in the border to free-motion stitch the lines there.

(Click on a photo to view it larger)

Threads used:

  • Top: Fil-Tec Glide ‘White’ (40 wt, trilobal polyester, colour 10000); Robison-Anton ‘Ming’ (40 wt, rayon, colour 2322)
  • Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (white)

Photos of all the Community Quilts I’ve quilted are here: http://www.flickr.com/photos/rhondamadeit/sets/72157630291250200/





Community Quilt 380

17 03 2018

Red, white, pink/apricot, and aqua — not colours I’d think to put together, but I think they worked well in this quilt. I started by stitching in the ditch around the blocks (in red), then did a large meandering stipple in the border (also in red thread). For the main top, I stitched an ‘open headband‘ motif in a soft aqua thread.

(Click on a photo to view it larger)

Threads used:

  • Top: Fil-Tec Glide ‘Cardinal’ (40 wt, trilobal polyester, colour 70001); Robison-Anton ‘Sprite’ (40 wt, rayon, colour 2313)
  • Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (candy apple red, white)

Photos of all the Community Quilts I’ve quilted are here: http://www.flickr.com/photos/rhondamadeit/sets/72157630291250200/