Community Quilt 39

16 12 2012

Another blue and cream quilt… Pinwheels this time.

Some of the fabrics had water, fish, water lilies, or water birds in them, so instead of following any of the very geometric shapes of the pinwheels, I went for something quite different — water! I used a pretty pale blue to mid blue variegated thread and I think it worked well for this all-over design. I like how it gives a ‘modern quilt’ feel to this traditional pinwheel pattern.

I timed this one properly and also reset the stitch counter on my Sweet Sixteen — the quilting took 3 hours and some 80,000 stitches.

Click on a photo to view it larger.

quilt39_01

quilt39_03

The back:quilt39_02

Threads used:

  • Top: Wonderfil Tutti (Egyptian cotton, 50 wt; colour TU 21)
  • Bobbin: Bobbinfil (white, 70wt)

Photos of all the Community Quilts I’ve quilted are here: http://www.flickr.com/photos/rhondamadeit/sets/72157630291250200/





Community Quilt 38

16 12 2012

This was a big quilt, with well over 120 appliqued butterflies arranged in circles in each block. How to quilt it?

Click on a photo to view it larger.

quilt38_01

Well, I wanted to make the butterflies ‘pop’, so I decided to do a small stipple around them, but I didn’t want the stipple to take over, so I grabbed a large bowl from the kitchen and marked a big circle. I figured I’d do something in the circle later…

After quilting around all the butterflies in all the blocks, I now had an empty circle in the middle. Well, that looked odd, so I thought maybe I could stitch a butterfly in the centre of each circle, but I needed the central butterfly to ‘pop’ too, so I went with a smaller inner circle (another kitchen bowl), then the butterfly in blue, with blue and pink in the wings (there was some pink in some of the blue fabrics), followed by more stippling around each butterfly to make it stand out.

quilt38_02

About the centre butterfly: I could have hunted through all my books, magazines, tear-out templates from magazines etc. for a suitable butterfly outline, but I could have spent hours doing that and still not find the outline I wanted. So off to Google! I searched for butterfly outline then clicked on the Google Images link. Once I found the shape I wanted, I printed it out at the correct percentage to fit my centre (yes, I had to try a couple of % settings first!). Then I put the printout under a sheet of stiff plastic (the sort used as the outer cover of spiral- or coil-bound business reports), and marked the outline with a thin Sharpie. Then I cut out the plastic template and used a marker to go around this template in the centres. I stitched around each outline in blue, then did a very free motion design inside the wings in the same blue as well as the little banana-shaped stitches up and down the body, followed by the antenna also in the same blue. Once I’d done that, I added some free motion pink curlicues inside the free-motioned blue wing shapes. No patterns for any of that inside the butterfly — just from my head.

As all the blue sashing fabrics had a leaf motif, I stitches leaves in the sashing strips in the same blue thread as the centre butterflies.

quilt38_03

I think it took about 8 to 12 hours to quilt this large quilt  — I did it over two days.

The back:

quilt38_04

Threads used:

  • Top: Fil-Tec Glide (‘Cream’, colour 20001; 40 wt polyester); Floriani (blue, colour PF373; 40 wt rayon (?)); Robison-Anton (‘Pale orchid’ [pink], colour 2423; 40wt rayon)
  • Bobbin: Bobbinfil (white, 70wt)

Photos of all the Community Quilts I’ve quilted are here: http://www.flickr.com/photos/rhondamadeit/sets/72157630291250200/