I started this one at the ‘sit and sew’ stations at QuiltWest two weekends ago, and finished it last weekend. I’ve been super busy at work, so it’s taken all week to get the photos taken and posted.
Just a simple heart and loop motif for this one, to match the blue appliqued hearts. All stitched in a white cotton thread (I think I use white Bobbinfil on the top and bottom).
This pretty quilt was a real challenge. The first challenge was how to quilt it, the second was how to deal with some of the very bulky 3D objects, and the third challenge was what to do about the unfortunate rust-type staining on some of the blocks.
Before I stitched any of the main designs, I stitched in the ditch with invisible thread around EVERY single applique motif. Yes, there were a lot… This took several hours.
I tried removing the worst stain with some dishwashing liquid, but while that dulled the stain a little, it didn’t take it out. I sure wasn’t going to wash this quilt as there were a LOT of red fabrics in it and also red thread used for hand embroidery — if only one of those reds ran, I’d be in a worse situation than when I started. So I decided to leave the stains and hope that someone else has a good idea on how to deal with them, or that no-one else will notice them 😉
The very bulky 3D objects (especially the chrysanthemums in the centre block) were hard to get around and I got my open-toe hopping foot caught in them a couple of times, so, where I could, I backed into these objects to avoid creating havoc.
But the big challenge was how to quilt this quilt. The blocks were really big (18″ square) and there was a lot of white space surrounding each of the hand-appliqued motifs. I decided on a circle around each, but puzzled over what circular household object I had that was big enough for me to make a circle template. Nothing… So I sent my brain further afield to the shed where I remembered that we had a rock/soil sieve that was large and circular. Off to the shed… Yep — that worked! I pulled apart a 30-pack Diet Coke carton and drew two circles on it with a Sharpie — one for the larger circle at the top of the sieve (nearly 16″ diameter) and the other for the smaller base of the sieve (~13″ diameter). I then cut the templates out of the cardboard and laid them over the motifs. Initially I was going to use the larger one, but decided on the smaller one as I could get an under/over effect with it on almost all the applique designs; with the larger one, almost every design was going to be inside the circle.
I then used an ordinary 2B pencil to lightly trace around the template on each motif — light enough to see the pencil lines when I was stitching, but not enough for them to show once stitched. Then I used an off-white thread to stitch each circle along the marked lines. Then I braved ‘winging’ it by eyeballing a stitching line 1/4″ outside the main circle, thus creating a circular border. Some of the lines were a little wobbly, but I was pretty pleased with them overall.
Next came the decisions about how to quilt inside each circle — or whether to leave the insides unstitched and only stitch the areas outside the circles. I decided on stitching inside the circles, and while I initially thought I’d quilt outside the circles too, I decided not to once I’d quilted the insides, as I thought it would be overkill. Of course, each motif was different — should I use the same quilting stitch inside every circle, or vary it according to the design of the motif?
The end results are below. I’m pretty please with how they turned out, but they took much longer than I thought they would — I guess I spent about eight to twelve hours quilting all the blocks, in addition to the time spent stitching in the ditch.
Finally, what to do with the red sashing and the borders… I went with something very simple here so as to not draw the eye away from the centres of each block, and just did a straight line box around each block, some 1/2″ inside the block (in off-white), stitch-in-the-ditch at each seam (also in off-white), and 1/2″ outside the block (in red thread).
(Click on a photo to view each block in detail)
Threads used:
Not my colours, not my favourite design, but hey — when you do community quilts, you get to quilt what’s been given to you 😉 And that’s part of the fun of the challenge!
For this one, I decided to use a matching variegated dark blue thread so that it disappeared into the quilt and didn’t try to overpower it. I also used a squared off ‘open headband‘ motif because I wanted to add some curves to the very geometric quilt design, but flowers etc. weren’t going to work for this fairly dark and masculine quilt.
(Click on a photo to view it larger)
Back:
Threads used:
What a bright, fun quilt! Some child will love this one as it’s full of jungle animals and other animals, and has such gorgeous bright colours.
Deciding on a all-over leaf quilt design was pretty easy with that jungle theme going on… and deciding on a bright fluoro lime green was easy too.
Unfortunately, it was quite a dull day when I took the photos, so they’re a little washed out.
(Click on a photo to view it larger)
Back:
Threads used:
I had high hopes for this quilt. It was big and it had a rich backing fabric that led me to believe that the top would be as exotic. Unfortunately, it wasn’t as exotic as I’d hoped for. And the batting was a high-loft polyester wadding, which meant that this quilt was hard to handle as it kept wanting to ‘run away’ from me.
As a consequence of its sheer size and the thick polyester wadding, my first job was to stitch it down. Normally, basting pins are sufficient, but this one needed the ‘ESS’ touch (‘[stitch] Every Stinking Seam’ — attributable to Cindy Needham), so I stitched in the ditch around every block, and then within the blocks using a very lightweight (100 wt) thread in a matching beige. While I didn’t quite achieve ESS, I came close. I started using my Line Tamer ruler for the stitch in the ditch, but as some of the blocks only had short straight lengths, I discarded it and went for ‘eyeballing’ the straight lines.
Although I was tempted to do some quite detailed quilting in each block, time was against me (and I really didn’t like the ‘hand’ of the quilt with all that polyester wadding), so instead I decided to just quilt the sashing borders with a decorative orange thread, spiralling in the keystone blocks, and doing vertical and horizontal wavy lines between the spiral blocks.
I had to take the photos of this quilt inside as it was bucketing with rain outside and I was in a hurry to get this one packaged up and taken with me to Perth to be dropped at the Community Quilts coordinator’s house. So the photos are a little blurry.
(Click on a photo to view it larger)
Threads used:
And then there are the quilts that are just so bright and, well, jolly! This was one of them. Who’d have thought that flouro lime green and bright pink would go together? But with the addition of black, they sure did.
But how to quilt it? I thought about emulating the paisley motif in the pink fabric, or doing just straight lines (a la modern quilts), but ended up opting for largish circles in a neon/fluoro lime green thread in the main top, then a sort of ‘stem and leaf’ motif in neon/fluoro pink in the borders, leaving the solid pink border empty of any quilting.
I had fun doing the circles, but the stem/leaf borders took much longer than I expected.
I also loved the Aboriginal design backing fabric on this quilt, and felt it was a bit lost there — it would make a good quilt in its own right.
(Click on a photo to view it larger)
Back:
Threads used:
A few of the quilts I get to quilt for the Community Quilts program are just weird, in my opinion — this one falls into that category. I have no idea what inspired Windham Fabrics to make this circus panel from the 19th century/early 20th century, or what inspired someone to buy it, or what/who inspired them to make a quilt with eight panels rolled straight off the bolt of this strange fabric!
I suspect this is an old panel, as the backing fabric also looked old and a dessicated carcass of a beetle feel out when I opened it up. Also, it had been hand basted and the thread used for the basting felt old too.
So, how to quilt it? There was so much going on in the panels that I decided to just outline the main features in a 100 wt almost-black thread. I wasn’t sure what — if anything — to do with the ‘sashing strips’ surrounding the panels and eventually decided to just stitch the cursive word ‘circus’ multiple times (in the same thread) to hold them down.
A very strange quilt…
(Click on a photo to view it larger)
If you look carefully, you might see the word ‘circus’ stitched in the black sashings/borders:
Threads used:
I loved the colours in this quilt, and with the fish and the butterflies, I was always going to quilt it with a flowing motif. And to enhance the colours in the quilt, I used a bright neon/fluoro lime green top thread!
I started in the centre with big dipping waves across the quilt, echoing these waves (to a degree) from the centre out, gradually making the waves less steep by the edges.
Update: I found out after I’d done it that what I thought were fish were actually parrots!!!
(Click on a photo to view it larger)
Back:
Threads used:
And then there are the wonky quilts… This one was the wonkiest I’ve tackled so far. All those bias edges were wonky when sewn into the blocks, and the border was wonky.
So how to quilt a wonky quilt with fabric that bunched up in many places? You beat it into submission with lots of fairly dense quilting! 😉
I chose a matching variegated thread in blues, greens and purples, using a rounded spiral morphing into spikes, then echoed with rounded hops. I have no idea what this design is called but it achieved the end result of flattening this very wonky quilt top.
(Click on a photo to view it larger)
Back (still with some loose threads caught):
Threads used:
Some quilts just sing. And this one had a whole choir going on 😉
I love batiks, and I especially likes how the maker combined shades of batiks I’d never have thought to put together to make this HUGE quilt top (I think this is the biggest I’ve done on my Sweet Sixteen). With the colour and the chevrons, and the overall linear movement of the quilt, I just had to stitch it with straight lines, a la modern quilting. I used a variegated thread with purples, greens, and browns/tans. And I used my Line Tamer ruler for the straight lines.
(Click on a photo to view it larger)
Update Sept 2014: This quilt became a raffle quilt, raising $1850 for a charitable organisation and going to a lovely family: http://waquilters.com/2014/09/30/friends-of-larche-raffle-quilt/
Threads used:
Rhonda Bracey: At Random 