Yellow hibiscus

4 01 2017

When I was in Houston last November for the International Quilt Festival, I took lots of classes, mostly related to art quilts. One was a full-day class with Melinda Bula, whose work I’ve admired for a long time, especially after I saw it up close and personal when she taught at Empty Spools Asilomar in February 2014. At Asilomar I took Pam Holland’s 5-day class (no regrets about doing that!), but it was a toss-up between Pam’s class, Melinda’s class, and Susan Carlson’s class — all great teachers, all techniques I wanted to learn, but all on the same week!

So when I saw that Melinda was teaching a one-day class at Houston, I jumped at the chance and was lucky enough to get a spot in her ‘Fabulous Fusible Flowers: Hibiscus’ class. I made good progress on my piece, and finished it off at home by the end of November, except for the binding, hanging sleeve, and label. Well, now it’s all done!

I did some fairly heavy ‘thread painting’ on it, but left some of the yellow areas to ‘pop’ — just like the ridges on a real hibiscus flower. For the pollen heads, I couched some fuzzy yellow yarn, then lightly touched the tops of them with a red Copic marker. The patterns and all fabrics for the flower and the stem were from the kit Melinda supplied for the class (each person chose a different coloured kit for their hibiscus — I chose the yellow, though I could have chosen pink or purple). I supplied the background fabric and the green fabrics for the leaves. And yes, there are HUNDREDS of pieces of fabric fused in the petals…

I’ll put this piece into a couple of competitions/exhibitions, then I’ll make it available for sale. The size is 80 cm wide (31.5 inches) by 65 cm high (25.5 inches).

This art quilt is now available for sale from my Etsy store: https://www.etsy.com/au/listing/618945129/yellow-hibiscus-art-quilt

(Click on a photo to view it larger)

p1080047

p1080055

 

p1080048

p1080049

p1080050

p1080051

p1080052

p1080053

p1080054





Stop foot pedal scooting across the floor

1 01 2017

I have lovely hardwood floors in my house. But they are a darned nuisance for my Handi Quilter Sweet Sixteen’s foot pedal — it wants to slip further and further away from me as I put pressure on it. I tried putting that non-slip stuff underneath it (you know — that slightly tacky plastic mesh stuff you put under rugs or in drawers to stop things sliding around). It worked to a point, but eventually the foot pedal would creep away. I needed to come up with a better solution…

On one of the forums, someone had suggested putting Velcro dots under the foot pedal if you’re on carpet. Well, my machine isn’t on carpet, but that got me thinking… Perhaps Velcro dots would work with something else that doesn’t slip on wooden floors? Hmmmm….

Something like an old neoprene mouse mat, perhaps? That’s neoprene on the top and bottom, not the newer mouse mats that have a slippery top surface.

So I tried it, and I’m here to report that with the combination of Velcro dots on the feet on the foot pedal AND a neoprene mouse mat, my foot pedal no longer slides or creeps away from me. I call that a win!

I haven’t tried this on tile, but I expect it would work similarly – worth a try, anyway.

Velcro dots stuck to the base of the foot controller

Velcro dots stuck to the base of the foot controller

Foot controller with Velcro feet sticks to the neoprene mat, which sticks to the wooden floor

Foot controller with Velcro feet sticks to the neoprene mat, which sticks to the wooden floor





Community Quilt 305

1 01 2017

This small, colourful, and very geometric quilt needed something to soften the hard edges, so I quilted it using the curvaceous open headband motif in a bright yellow thread.

(Click on a photo to view it larger)

quilt305_01

quilt305_02

Threads used:

  • Top: Fil-Tec Glide ‘Mango’ (40 wt, trilobal polyester, colour 80116)
  • Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (light tan)

 





Community Quilt 304

1 01 2017

Another big quilt made with ‘busy’ fabrics. To quilt it, I stitched in the ditch around all the elements in the blocks, then did cathedral windows in the small 2″-square internal borders. I did a large meandering stipple in the main border.

(Click on a photo to view it larger)

quilt304_01

quilt304_02

Threads used:

  • Top: Fil-Tec Harmony ‘Driftwood’ (40 wt, cotton, colour 14069)
  • Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (light tan)

 





Community Quilt 303

1 01 2017

How to quilt this scrappy quilt made with very ‘busy’ fabrics? I decided on a simple cathedral window motif for each of the squares in the main part of the quilt and the border, using a variegated green and yellow thread.

(Click on a photo to view it larger)

quilt303_01

quilt303_02

Threads used:

  • Top: Superior ‘Nile Crocodile’ (40 wt, cotton, colour 943)
  • Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (light tan)

 





Community Quilt 302

1 01 2017

This was a really big quilt. How to quilt it? I decided on an all-over motif, a variation of open headbands, with ‘petals’ to emulate flowers. I used a purple, yellow, and cream variegated thread, which seemed to work well with the pinky-mauve main colour in this quilt.

(Click on a photo to view it larger)

quilt302_03

quilt302_01
quilt302_04

Back:

quilt302_02

Threads used:

  • Top: Wonderfil Mirage (30 wt, rayon, colour SD 32)
  • Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (light tan)

 





Community Quilt 301

27 12 2016

This scrappy quilt had so many different fabrics and colours that any quilting was going to get lost in it, so I opted to do a large meandering stipple to hold the layers together.

(Click on a photo to view it larger)

quilt301_01

quilt301_02

Threads used:

  • Top: Fil-Tec Harmony ‘Autumn’ (40 wt, variegated cotton, colour 14081)
  • Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (light tan)

 





Community Quilt 300

27 12 2016

Number 300! 300 quilts quilted for the Western Australian Quilters Association Community Quilts program in the 54 months since June 2012!

This 300th quilt used fabrics in dark jewel tones, and looked to me like a disappearing nine-patch. I decided to quilt it in spirals to counterbalance the geometric nature of the blocks, using a variegated purple thread.

(Click on a photo to view it larger)

quilt300_01

quilt300_02

Threads used:

  • Top: Fil-Tec Harmony ‘Violets’ (40 wt, variegated cotton, colour 14072)
  • Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (lead gray)

 





Community Quilt 299

27 12 2016

How to quilt this blue and brown quilt? Well, the star blocks gave me a clue. After stitching in the ditch around the main elements, I stitched big wonky stars in the two brown blocks, and more in the centres of some of the other blocks too.

(Click on a photo to view it larger)

quilt299_01

quilt299_03

quilt299_02

Threads used:

  • Top: Robison-Anton ‘Best Brown’ (40 wt, rayon, colour 2566)
  • Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (lead gray)

 





Community Quilt 298

27 12 2016

It was hard to decide how to quilt this small ‘Chinese coin’-style scrappy quilt. After stitching in the ditch around the main colour blocks, I stitched vertical lines to cross the horizontals of the ladder-like strips. In the beige border I did a ‘u’ or ‘n’ motif, and a simple stipple in the green floral border.

(Click on a photo to view it larger)

quilt298_01

quilt298_02

Threads used:

  • Top: Aurifil (50 wt, cotton, colour 2310)
  • Bottom: Fil-Tec Magna Glide Classic pre-wound bobbin (light tan)